Research-grade compound. Laboratory use only. Not intended for human or animal use, ingestion, or injection. No medical claims are made or implied.
Storage Vials 3ml (5-Pack)
Free shipping on orders over €200
- If a product doesn't match the specification on its published COA, contact us with your batch number: we investigate against the lot's report and replace any product that fails it, at no cost to you.
- Contact us within 48 hours of delivery with photos of the outer box, inner packing, and any affected vials with labels legible. Confirmed transit damage is replaced at no cost to you.
3–7 days most of the EU · 10–14 Nordics/Baltics
Standard EU from €4.99 (RO) · core EU GLS €17.99 · Nordics/Baltics €12.99–€15.99 · Dispatched within 1–2 business days · Free shipping over €200.00 · no customs paperwork (EU) · via EU carrier network
€200.00 away from free shipping over €200.00. Under that, standard EU shipping is €17.99 (GLS, most of the EU).
How Paysera and SEPA work
- Pay: send a manual SEPA transfer using the IBAN we email you, or, where checkout offers it for your address, approve a SEPA transfer in your own bank via Paysera's hosted page.
- We confirm — Paysera notifies us instantly, or we match a manual transfer when it arrives (usually 1 business day).
- We dispatch — confirmed orders typically ship within 1–2 business days.
Card payments are not currently offered. There is no card processor on this checkout.
Clear borosilicate glass storage vials 3ml (5-pack). Aluminium-sealed caps. USP Type I glass. For peptide storage.
| Quantity | Price Each | Total | Savings |
|---|---|---|---|
| 1 unit | €17.99 | €17.99 | -- |
| 3+ | €17.09 | €51.27 | 5% off |
| 5+Most Popular | €16.19 | €80.96 | 10% off |
| 10+ | €15.29 | €152.91 | 15% off |
Important Notice
This product is intended for laboratory and research use only. Not for human or veterinary use. By purchasing, you confirm this product will be used exclusively for in-vitro research purposes.
Published laboratory reports are available for selected lots. Check each report for its result and stated method. For research purposes only.
Janoshik report published when available
Dispatched within 1–2 business days, shipping from €4.99 in Romania, from €12.99 across the rest of Europe
About Storage Vials 3ml (5-Pack)
These 3ml storage vials are a convenient container for reconstituted peptides in laboratory settings. The clear borosilicate (USP Type I) glass is inert to the solvents typically used in peptide reconstitution and does not leach into solution the way some plastics can -- benzyl alcohol from bacteriostatic water, in particular, interacts poorly with certain plastics over time. Clear glass also lets you visually inspect the solution for cloudiness or particulates before each draw.
Specifications
The 3ml volume suits single-compound reconstitution and short-term working stocks, where you keep one vial per peptide rather than pooling your whole inventory in a single large container -- a contamination or breakage event then affects only one compound. At 3ml, each vial holds a typical reconstitution volume while staying compact and economical to stock in multiples.
Because clear glass does not filter light, store filled vials away from direct light and refrigerate or freeze them according to the compound's stability requirements -- many peptides are photosensitive in solution. Label each vial with compound name, concentration, date of reconstitution, and lot number immediately after filling; the glass accepts permanent marker directly.
Product Specifications
| Parameter | Value |
|---|---|
| Volume | 3ml each |
| Quantity | 5-pack |
| Material | Clear borosilicate glass (USP Type I) |
| Closure | Aluminium-sealed cap |
| Sterility | Pre-sterilized |
Storage and Use
Store empty vials at room temperature in a dry, clean location. Once filled, refrigerate at 4°C or freeze at -20°C depending on the compound stability requirements, and keep them out of direct light. Swab the seal with 70% isopropyl alcohol before each needle insertion. Do not store peptide solutions in plastic if benzyl alcohol is present -- migration and sorption to container walls can reduce effective concentration over weeks.
How do I protect peptides from light in clear glass vials?
Many peptides contain amino acids (tryptophan, tyrosine, phenylalanine, methionine, cysteine) that are photo-oxidized by UV light, and disulfide-bonded peptides are particularly vulnerable. Clear glass does not filter UV, so the practical control is to limit exposure: store filled vials in the dark (a drawer, box, or the refrigerator), minimise time on a lit bench, and avoid leaving solutions under direct or fluorescent/LED light for extended periods. The upside of clear glass is that you can visually inspect every vial for cloudiness, particulates, or colour change before drawing.
How do you maintain sterility of a multi-use vial?
Wipe the seal with a fresh 70% isopropanol swab before each puncture and allow it to dry for 30 seconds before inserting the needle. Use a new syringe for each draw -- do not re-use syringes between vials or between animals. Avoid touching the seal with ungloved hands. If you see any cloudiness, particulates, or colour change in the solution, discard the vial -- bacterial contamination typically produces turbidity before more obvious signs appear. Bacteriostatic water extends the window, but it does not sterilize a vial that has already been compromised.
Storage vials are supplied for laboratory research use only. For research purposes only.
Specification Summary
About Storage Vials 3ml (5-Pack)
These 3ml storage vials are a convenient container for reconstituted peptides in laboratory settings. The clear borosilicate (USP Type I) glass is inert to the solvents typically used in peptide reconstitution and does not leach into solution the way some plastics can -- benzyl alcohol from bacteriostatic water, in particular, interacts poorly with certain plastics over time. Clear glass also lets you visually inspect the solution for cloudiness or particulates before each draw.
Specifications
The 3ml volume suits single-compound reconstitution and short-term working stocks, where you keep one vial per peptide rather than pooling your whole inventory in a single large container -- a contamination or breakage event then affects only one compound. At 3ml, each vial holds a typical reconstitution volume while staying compact and economical to stock in multiples.
Because clear glass does not filter light, store filled vials away from direct light and refrigerate or freeze them according to the compound's stability requirements -- many peptides are photosensitive in solution. Label each vial with compound name, concentration, date of reconstitution, and lot number immediately after filling; the glass accepts permanent marker directly.
Product Specifications
| Parameter | Value |
|---|---|
| Volume | 3ml each |
| Quantity | 5-pack |
| Material | Clear borosilicate glass (USP Type I) |
| Closure | Aluminium-sealed cap |
| Sterility | Pre-sterilized |
Storage and Use
Store empty vials at room temperature in a dry, clean location. Once filled, refrigerate at 4°C or freeze at -20°C depending on the compound stability requirements, and keep them out of direct light. Swab the seal with 70% isopropyl alcohol before each needle insertion. Do not store peptide solutions in plastic if benzyl alcohol is present -- migration and sorption to container walls can reduce effective concentration over weeks.
How do I protect peptides from light in clear glass vials?
Many peptides contain amino acids (tryptophan, tyrosine, phenylalanine, methionine, cysteine) that are photo-oxidized by UV light, and disulfide-bonded peptides are particularly vulnerable. Clear glass does not filter UV, so the practical control is to limit exposure: store filled vials in the dark (a drawer, box, or the refrigerator), minimise time on a lit bench, and avoid leaving solutions under direct or fluorescent/LED light for extended periods. The upside of clear glass is that you can visually inspect every vial for cloudiness, particulates, or colour change before drawing.
How do you maintain sterility of a multi-use vial?
Wipe the seal with a fresh 70% isopropanol swab before each puncture and allow it to dry for 30 seconds before inserting the needle. Use a new syringe for each draw -- do not re-use syringes between vials or between animals. Avoid touching the seal with ungloved hands. If you see any cloudiness, particulates, or colour change in the solution, discard the vial -- bacterial contamination typically produces turbidity before more obvious signs appear. Bacteriostatic water extends the window, but it does not sterilize a vial that has already been compromised.
Storage vials are supplied for laboratory research use only. For research purposes only.